Disano 23804000 - rapid system t8 6401 fl 1x18 cnr bia

Housing: In rolled steel, hot dipped galvanized, with rounded edges to protect and polycarbonate end caps. Painting: Prepainted galvanized steel with baked white polyester resin, UV-stabilized, anti-yellowing, upon phosphate treatment. Lampholder: In polycarbonate, with contacts in bronze, for quick connection, with protective collars lamp from falling. Electric gear: 230V/50Hz power supply. Hard wire, 0.50 sqmm cross section and PVC-HT sheath resistant up to 90 ° C, according to CEI 20-20 standards. T 2P terminal block with maximum allowed lead cross section 2.5 mm ². EQUIPMENT: ratchet fastener, nylon. Mounting: channel directly to ceiling or wall. Regulations: Produced according to applicable EN60598-1 CEI 34-21 standards, IP40IK07 degree of protection according to EN 60529 standards and approved by the Quality Mark (IMQ). have obtained the ENEC European Certificate of Conformity. Can be installed on normally inflammable surfaces. Additional gear: Electronic ballast. Group of emergency. Emergency version: In the case of'' black-out'' a single lamp connected to the emergency circuit remains on, thus avoiding due to sudden power failure. When power is restored, the battery recharges automatically.