Bticino ln4661m2 - ll - attuatore tapparelle bus

Flush-mounted two-module actuator device with 2 internal relays and equipped with 3 buttons and 3 two-color LEDs, it is designed to work in conjunction with the control devices specific for shutter management (UP, DOWN and slat position). However, the actuator can also be managed by all the other control devices however, the Preset function will not be available. In addition to the UP \/ DOWN Monostable and Bistable operating modes, the actuator allows, after pressing the STOP button, to set the shutter in a specific position (Preset). While operating in this state, the Preset LED will light up. The device is supplied with 9 preset positions, which can be selected by means of the numerical configurator 1 - 9 in the seat called \u201cPre\u201d, in the rear part of the actuator. It is however possible to set a new position according to the user's needs; for the configuration methods see next page. The Preset function can also be managed with the Scenario module (activation of scenarios with rolling shutters in predetermined positions). In this case, move the rolling shutter to the desired position while storing the scenario. Technical features