We present our new promotion concerning , a state-of-the-art that allows you to control access with temperature verification body, mask presence and facial recognition.

This device is capable of non-contact recognition and remote temperature detection, to make controlled areas safer, more accurate and more efficient. Body temperature control also has voice and sound alert It is possible to set a warning threshold in case of high temperature. When the system detects that the temperature exceeds the set threshold emits an alarm (acoustic and visual) e if connected to an automated access gate, it can also arrange for opening or not of the same. The maximum error threshold is only 0.3 ° C.

The device can automatically recognize if the person is wearing a mask protection, otherwise it can signal it and as for temperature control, it can program in such a way that if the user does not wear the mask, the gate will not open. Check for the presence of the protective mask

Thanks to a powerful algorithm and with a database that can handle up to 30,000 faces, it will be It is possible to manage access control also through biometric verification and register entry or the exit. Biometric control via facial recognition

Metal structure, 7 "IPS HD display, 2MP Sony Starvis camera, Integrated speaker, Degree of protection IP66. Structure

It can be installed on automatic gates but also at normal entrances, counters or halls waiting room thanks to the various table, wall or floor supports. Installation

Management software provided free of charge for centralized control of one or more units e database management.

Specialized technical support
Being a very sensitive issue, it is essential that the installation follows certain procedures, which is why a Longse specialist will support the partners from the design stage.

Features:

  • Storage capacity 30,000 users
  • Speed ??of facial recognition 200 ms
  • recognition accuracy 99.5%
  • 1080P resolution
  • 7 ”HD IPS screen
  • Lens 2.4 / 4.5 mm
  • Detection distance 0.5-2.3m
  • Bench stand
  • Facial recognition 0.5-1.3m to allow access No contact, safe and reliable;

Covid-19 emergency government protocol In agreement with the Government, on March 14, trade unions and companies signed a protocol to protect the health and safety of workers from the possible contagion of the new coronavirus and to ensure the healthiness of the workplace. In this case, our solution responds to two fundamental points: How to access the workplace Checks upon entering the company. The staff, before entering the workplace may be subjected to body temperature control. If this is higher than 37.5 °, access will not be allowed. People in this condition will be temporarily isolated and provided with masks. They will not have to go to the emergency room and / or the infirmaries of the office, but must contact their doctor as soon as possible and follow his instructions. Personal protective equipment If the work activity requires an interpersonal distance of less than one meter and other organizational solutions are not possible, the use of masks and other protective devices (gloves, goggles, overalls, caps, gowns) in compliance with provisions of the scientific and health authorities. The preparation by the company of the detergent liquid according to WHO guidelines is favored.

BiTS Network Privacy Reminder

BiTS Network Privacy Reminder