Ave redefines the concept of light point with 50 innovative solutions for plasterboard walls and light partitions.
The RIVOBOX 253X4CG are the first flush-mounting boxes with 3 or 4 modules that house the supports, the inserts and the relative plates (with 3 or 4 modules) of the main civil series.
Just remove the plastic cap placed on the metal eyelet and fold the metal fins (patented by AVE) to increase the distance between the screws from 83.5 mm to 108.5 mm and increase the light point modules from 3 to 4. The lateral plastic fins, equipped with honeycomb holes that facilitate the insertion of the screws, allow the box to be applied on both sides of the slab, halving the application times and eliminating the need for glues, fillers and polyurethane foams. On the bottom of the box, the cusps for centering the cup facilitate the milling for the front insertion on the plate.
The RIVOBOX boxes are pre-arranged for the insertion of the corrugated tube locking accessory, which prevents the tube from being released during wiring and allows you to fix tubes with a diameter of 20 mm and 25 mm, up to a maximum of 10 tubes per box. This fitting also allows the pipe to be trimmed flush with the internal edge of the box, increasing the internal maneuvering space for inserting cables. The level of protection of the casing on the bottom IP4X (compliant with the CEI 64-8 standard for special locations),
Ave redefines the concept of light point with 50 innovative solutions for plasterboard walls and light partitions.
The RIVOBOX 253X4CG are the first flush-mounting boxes with 3 or 4 modules that house the supports, the inserts and the relative plates (with 3 or 4 modules) of the main civil series.
Just remove the plastic cap placed on the metal eyelet and fold the metal fins (patented by AVE) to increase the distance between the screws from 83.5 mm to 108.5 mm and increase the light point modules from 3 to 4. The lateral plastic fins, equipped with honeycomb holes that facilitate the insertion of the screws, allow the box to be applied on both sides of the slab, halving the application times and eliminating the need for glues, fillers and polyurethane foams. On the bottom of the box, the cusps for centering the cup facilitate the milling for the front insertion on the plate.
The RIVOBOX boxes are pre-arranged for the insertion of the corrugated tube locking accessory, which prevents the tube from being released during wiring and allows you to fix tubes with a diameter of 20 mm and 25 mm, up to a maximum of 10 tubes per box. This fitting also allows the pipe to be trimmed flush with the internal edge of the box, increasing the internal maneuvering space for inserting cables. The level of protection of the casing on the bottom IP4X (compliant with the CEI 64-8 standard for special locations),